Organotin removal methods include water-soluble and solid-supported stannanes, catalytic methods, and alternative reagents based on less toxic metal and metalloid hydrides. Silica gel elution is one method to remove the organotins, followed by standard flash column chromatography to complete the purification. The second method does not require pretreatment of the product mixture because after concentration, the residue is eluted only by a stationary phase consisting of 10% finely ground potassium fluoride and 90% silica (w/w). In this way, the content of organotin impurities can be reduced to below 30ppm. Organotin is a harmful substance that is difficult to degrade, so its existence in the environment will bring potential risks to human health and ecosystems. The following are several common organotin removal methods:

1. Biodegradation method: This method uses microorganisms to decompose organotin molecules, which can be applied to water bodies and Organotin in the soil pollutes the site. However, biodegradation requires a long time and specific strains of microorganisms, making it difficult to operate.

2. Chemical oxidation method: This method is to expose organotin compounds to strong oxidants (such as persulfate, potassium permanganate, etc.) , to oxidize organotin into harmless substances such as water and carbon dioxide. However, this method requires certain conditions, and the operation cost is relatively high.

3. Adsorbent method: This method is to use adsorbents, such as carbon black, activated carbon, bentonite, etc., on organotin-contaminated sites to absorb organotin Molecules adsorb to the adsorbent material, allowing them to be removed from the environment. However, the adsorbent will cause secondary pollution to the environment, and the adsorbent needs to be replaced constantly.

In general, different removal methods need to be selected according to the actual situation in the case of organic tin pollution, and several methods are often combined Combined use.

There are several ways to remove organotins from the environment. The most common method is:

• Adsorption: This is a process in which an organotin is attracted and absorbed by a solid surface. Activated carbon is often used as an adsorbent for organotin.

• Biodegradation : This is the process of organic tin being decomposed by microorganisms. This can be done in a natural setting (such as a wastewater treatment plant) or a controlled environment (such as a bioreactor).

• chemical oxidation : This is a process of decomposing organotin by chemical reaction. This can be done using a variety of oxidizing agents such as hydrogen peroxide or ozone.

• Photolysis : This is the process of organotin being decomposed by sunlight. This is a relatively slow process, but effective in removing organotins from surface water.

The best method for organotin removal will depend on the specific situation. For example, if organotins are present in wastewater, then biodegradation or chemical oxidation may be the best options. If the organotin is in the soil, then adsorption or photolysis may be the best options.

It is important to note that organotins can be highly toxic, so it is important to take precautions when removing them from the environment. Any work involving organotins should be done by trained professionals.