Xianning Bayflex 110-50 (15% Glass) PUR-aliphatic/MDI material report,
The value of strong nylon is when it absorbs water, the moisture content is 2.5 when there is no strong fiber, and the moisture content is 1.9%, 1.6%, 1.5% when the strong fiber is 15%, 30%, and 40% respectively; the linear expansion coefficient uses the flow direction /Vertical direction. There is not much research on PA66 material with high GF content in China. Adding an appropriate amount of PE can change the low-temperature resistance of PP. 3. After a period of time, the ink cartridges may become stuck or even stuck in the self-printing printer. This is often related to the material of the ink cartridge holder. PBT engineering plastics have good properties. The surface quality and self-contained nature ensure that the ink cartridge will not be stuck during repeated printing.
Polyvinylidene fluoride
Poly (vinylidene fluoride), the English abbreviation PVDF, mainly refers to vinylidene fluoride
Pvdf molecular formula ethylene homopolymer or copolymer of vinylidene fluoride and a small amount of fluorine-containing vinyl monomers, it has the characteristics of fluororesin and general resin, in addition to good chemical resistance, high temperature resistance, and oxidation resistance In addition to weather resistance and radiation resistance, it also has special properties such as piezoelectricity, dielectric properties, and thermoelectric properties. It is the second largest product among fluorine-containing plastics, with an annual global production capacity of more than 53,000 tons.
In the chemical structure, a fluorine-carbon bond is used. This structure with short bond properties forms the most stable and strongest bond with hydrogen ions. Therefore, fluorocarbon coatings have specific physical and chemical properties, not only have strong wear resistance and impact resistance, but also have high fading resistance and UV resistance in extremely harsh and harsh environments.
Xianning Bayflex 110-50 (15% Glass) PUR-aliphatic/MDI material report,
To
To
Xianning Bayflex 110-50 (15% Glass) PUR-aliphatic/MDI material report,
There is also no other disadvantages of performance degradation due to too much filler. , Radiation cross-linked wire can be used continuously at 100~110℃. 6. Organic silicon. PC/ABS plastic characteristics 1. Comprehensive performance, environmental protection, non- and dangerous,
FIGRA is called the flame extension index in many literature reports. It is defined by the ratio of PHRR to the time to reach PHRR. This value reflects the neutrality of the material. From the data in the table, we can see that the flame retardant is added Then the value is valid. 3. Good fatigue resistance. Xuzhou Tengfei Engineering Plastics is a high-tech enterprise specializing in the R&D, production and sales of engineering plastics, strong nylon, and modified engineering plastics. It is mainly engaged in various flame-retardant and tough nylon, ABS engineering plastics, special engineering plastics and other modified plastics. Hotline:. With strong vitality, engineering plastics are further improved. How to combine the glass fiber and polyamide interface, complex toughness has become a major focus of fiber modification. Significant heat resistance: the heat distortion temperature of nylon raw materials is about 100C, and the strength of PA6 glass fiber can reach 210C; the strength of PA66 glass fiber can reach 255C, which is remarkable. The various electrical properties of flame-retardant products, the processing temperature is 300-315℃, Principle 02 The principle of similar surface tension This is a colloidal chemistry principle.
To
