Dabco NE500/non-emission amine catalyst NE500
Overview:
Product Name: Dabco NE500
Alias: Dabco NE500, Non-emitting Amine Catalyst NE500, Strong Gel Amine Catalyst NE500, Dabco Strong Gel Amine Catalyst
Product Description: Dabco NE500 non-emitting catalyst for polyurethane block foams
Product Physical Properties:
Appearance: colorless liquid
Viscosity(25℃,mPa.s):1500
Density (25℃,g/cm3): 1.04
Water solubility: soluble in water
Flash point (PMCC,℃): >200
Hydroxyl value (mgKOH/g): 280
Brief introduction.
Dabco NE500 catalyst is a non-emissive tertiary amine used as a catalyst for polyurethane block sponges to promote urethane reactions.Dabco NE500 catalyst has reactive functional groups that react with the polyurethane matrix and therefore do not cause emissions.
Dabco NE500 catalyst is used in soft bulk sponge applications to meet the required specifications of Certipur or LGA. For polyurethane applications requiring low VOC and low emissions, Dabco NE500 catalyst is an alternative to DABCO 33-LV catalyst for non-emission needs.
Typical Physical Properties Table.
Appearance Colorless Clear Liquid
Specific Gravity 1.04
Viscosity @ 25°C mPa.s 1500
Water solubility @ 25°C soluble
Flash point, ℃ ＞200
Characteristics
Promote urethane (polyol-isocyanate) reaction
Non-emitting amine catalyst
Improves foam flow, can replace Dabco 33-LV catalysts
Reduces odor and VOC
Recommendations for Use.
Dabco NE500 catalyst is recommended for use in water-blown, methylene chloride (MC) or other alternative blowing agent block polyurethane foam systems. Dabco NE500 Catalyst is compatible with other commonly used polyurethane catalysts and additives and is readily miscible with polyols and polyol/water mixtures.
Product Usage:
Dabco NE500 is a non-emitting amine catalyst used to promote urea (water-isocyanate) reactions. It reacts into the polyurethane matrix so that no organic volatiles are generated;
Dabco NE500 is also used in flexible block foam (polyether and polyester) applications to meet Certipur or LGA requirements;
Dabco NE500 is a non-emitting catalyst that improves foam flow and can be used as a replacement for Dabco 33-LV catalyst;
Dabco NE500 can be used in any water-blown, methylene chloride-blown, etc. polyurethane block foam system.
Shelf Life.
Keep unopened for two years
Storage and Transportation:
Should be kept sealed and stored in a dry, cool and ventilated warehouse
Packing:
200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.
Company Name: |
Newtop Chemical Materials (Shanghai) Co., Ltd. |
Sales Manager: |
Hunter |
E_Mail: |
sales@newtopchem.com |
Telephone: |
86-152 2121 6908 |
Fax: |
86-021-5657 7830 |
Address: |
Rm. 1104, No. 258, Songxing West Road,
|
Website: |
www.newtopchem.com |
