Harbin Elastoflex R 27640R Resin / R 27640T Isocyanate PUR-MDI material report,

3. The releasability of the raw materials should be good, that is, after the mold is opened, the parts must be easily ejected from the mold cavity by the thimble. The longer the fiber, the better, and the notched impact strength of the material will increase. The use of strong nylon drag chains originated in Germany, and was later introduced to China with innovative structures. High-density paper p should be sprayed with cleaning agent and gently scrubbed from top to bottom.

1. Used in the electrical industry, used in the aerospace, aviation, electronics, instrumentation, computer and other industries as the insulating layer of power and signal lines, corrosion-resistant and wear-resistant materials can be used to make films, tube sheet rods, bearings, washers, valves and Chemical pipelines, pipe fittings, equipment container linings, etc. [4]
Polytetrafluoroethylene bottle[6] 2. Used in electrical, chemical, aviation, machinery and other fields instead of quartz glassware, used in atomic energy, medicine, semiconductor and other industries for ultra-pure chemical analysis and storage of various acids, alkalis, and organic solvents. It can be made into high-insulating electrical parts, high-frequency wire and cable sheathing, corrosion-resistant chemical utensils, high-cold oil pipelines, labor, etc. It can be used as additives for plastics, rubber, coatings, inks, lubricants, greases, etc. [4]
3. This product is resistant to high temperature and corrosion, has excellent electrical insulation, aging resistance, low water absorption, and excellent self-lubricating performance. It is a general-purpose lubricating powder suitable for various media and can be quickly applied to form a dry film , To be used as a substitute for graphite, molybdenum and other inorganic lubricants. Suitable for thermoplastic and thermosetting polymer release agent, excellent load-bearing capacity. It is widely used in elastomer and rubber industry and anti-corrosion. [4]
4. Used as a filler for epoxy resin to improve the wear resistance, heat resistance and corrosion resistance of epoxy adhesives. [4]
5. Mainly used as a binder and filler for powder cakes. [4]

To

To

Harbin Elastoflex R 27640R Resin / R 27640T Isocyanate PUR-MDI material report,
The flame retardant modification of ABS will have more good appearances in the future. The market demand for high rigidity nylon is increasing. New strong materials such as inorganic whisker and carbon fiber rein A will become important varieties. Used in automobile engine parts, mechanical parts and equipment parts. Nylon polymerized by ring-opening lactam is called nylon n, abbreviated as PAn. Glass fiber strong nylon 66 has high strength, PA66 has good comprehensive properties, high strength, good rigidity, impact resistance, oil and chemical resistance, abrasion resistance and self-resistance, especially hardness, rigidity, heat resistance and creep properties. Good, easy to obtain raw materials, low cost, so it is widely used in various fields such as industry, clothing, decoration, engineering plastics, etc.

To

1. Stable under normal temperature and pressure, avoid humidity, heat and high temperature [4]
There is no real melting point, and it decomposes slowly above 450℃ and becomes a gas directly. At 327°C, the mechanical strength suddenly disappeared. Insoluble in any solvents. In addition to reacting with molten alkali metals, it is not corroded by any substance, even if it is boiled in hydrofluoric acid, aqua regia or fuming sulfuric acid, sodium hydroxide, it will not change. [4]
2. White, odorless, tasteless, non-toxic powder, commonly known as “Plastic King”. It has excellent chemical stability, corrosion resistance, airtightness, high lubrication, non-stickiness, electrical insulation and good anti-aging resistance. High temperature resistance, the working temperature can reach 250℃. It is resistant to low temperatures and has good mechanical toughness at low temperatures. Even if the temperature drops to -196°C, it can maintain 5% elongation. Corrosion resistant, inert to most chemicals and solvents, resistant to strong acids and alkalis, water and various organic solvents. Good weather resistance and the best aging life among plastics. High lubrication is the lowest friction coefficient among solid materials. Non-adhesive is the one with the smallest surface tension among solid materials and does not adhere to any substance. It is non-toxic, physiologically inert, and has no adverse reactions as artificial blood vessels and organs implanted in the body for a long time. [4]
resolve resolution

To

3. Good decorative effect: it can be processed into products with complex shapes and multiple colors at one time. The green development of modified plastics is a scientific strategy for realizing development. No matter which one is not good, it is necessary to confirm that there is a certain quality control process, so as to highlight the advantages of the cost of using fillers. ,

And the strength and hardness of the fiber itself: the effect of cleaning and antifouling is very small. The mechanical properties are doubled: mainly the hardness and rigidity are doubled. 5. Nano-level material modification PP Nano-material is a kind of material with a brand-new structure developed in the mid-1980s and is known as “promising material in the 21st century”. Mechanical equipment: used to manufacture various gears, racks, worm gears, worms, bearings, cams, bolts, levers, crankshafts, ratchets, as well as some mechanical parts guards, covers, frames and other parts. The water ring polymerization reaction time is long,

To