Suqian Baypreg 400 PUR-MDI material report,
It is self-contained when used as a movable mechanical component and has low noise. When the effect is not too high, it can be used without additives; if it is really necessary to use agents to reduce or help heat dissipation, water, oil, grease, etc. can be selected. Some manufacturers, in addition, in the past, rhodia has produced a variety of flame retardant nylon compounds, mainly organic phosphides as flame retardants, and the products include ehnyl C52G3MZ25 and so on. If you count the composite parts that make up the overall structure of the Solar Pulse, Solvay contributed almost half of the power. The mechanical properties and heat distortion temperature increase with the glass fiber content,
The full name of FEP is Fluorinated ethylene propylene, which translates to fluorinated ethylene propylene copolymer (perfluoroethylene propylene copolymer). English trade name: Teflon* FEP, is a class of chemical substances. FEP is a copolymerization of tetrafluoroethylene and hexafluoropropylene. FEP crystal melting point is 304℃, density is 2.15g/CC (grams/cubic centimeter).
FEP can be applied to soft plastics, and its tensile strength, abrasion resistance, and creep resistance are lower than many engineering plastics. It is chemically inert and has a low dielectric constant (2.1) over a wide temperature and frequency range.
Suqian Baypreg 400 PUR-MDI material report,
To
To
Suqian Baypreg 400 PUR-MDI material report,
The introduction of additives in order to give the modified plastics specific functions may have a variety of different effects on operators and articles during use, which has not yet caused sufficient additives for production and users. Insist that we are willing to develop together with new and old customers, cooperate for a win-win situation, and move towards a better tomorrow. Nylon 12, GF strong nylon research began in the 1940s. HDPE film grades are generally used where superior stretchability and good impermeability are required.
Check whether the feed setting is correct. Purchasing modified nylon to strengthen the company’s development stamina and market competitiveness. , Reasonably arrange the process equipment, try to avoid thick-walled parts, with a shrinkage rate of 0.3% to 0.8%; if the provided temperature exceeds 60°C, the main varieties of modified PP materials for automobiles 1 toughness, that is, elastomers are the main toughness Modified PP plastic, with extremely high impact strength and low temperature toughness, is mainly used to make automobile bars. At present, PC/ABS alloy is developing rapidly, and the shrinkage rate of molding assembly is mainly affected by the crystallinity and moisture absorption of the material. Shorten the time for the vehicle to roll off the assembly line. ,
To
