Overview:

Product Name: Dabco RP205

Alias: Dabco RP205, Addocat 9727P, high efficient amine catalyst, Dabco amine catalyst, low density sponge catalyst Dabco RP205

Product Description: High efficient amine catalyst for low density (below 10kg\\\m³) sponges, with good operating tolerance and foam stabilization effect, it can replace the similar product SMP, which plays the role of amine catalyst. Has the ability to increase hardness. Used in the manufacture of low density flexible slabstock foam, it can provide wide process latitude.

Profile:

RP-205 is an amine catalyst developed for “dichloromethane formulations” (content >20), which is suitable for the production of low density (less than 10 kg/m3) slabstock foams.

RP-205 has a high catalytic capacity and high catalytic activity.

Compared to conventional amine catalysts, catalyst RP-205 provides good operating latitude and foam stabilization during the foaming process.

Compared with the same type of amine catalyst in the market, Catalyst RP-205 can increase the sponge hardness.

It is easy to use and can be directly replaced by customers using the same type of amine catalyst (within 10% difference in dosage).

Points for use: When using RP-205, it is recommended to pay attention to the following points:

RP-205 is recommended to be used as a separate amine catalyst.

2. It is recommended that the original amount of amine catalyst used be replaced by 1:1, and then fine-tuned according to actual needs. (It is recommended that the fine-tuning range is within 10% of the amine dosage.)

3、Catalyst RP-205 can be used directly for dosing or pre-mixed with polyether, the mixing ratio can be 1:5 to 1:12 or lower.

4、When catalyst RP-205 is mixed with polyether polyol, the storage period of the mixture should not exceed 12 hours. (Use up on the same day)

5、Because of the low vapor pressure of RP-205, the package should be sealed immediately after use to avoid volatilization and failure.

Shelf life.

Keep unopened for two years

Storage:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Overview:

Product Name: Dabco RP205

Alias: Dabco RP205, Addocat 9727P, high efficient amine catalyst, Dabco amine catalyst, low density sponge catalyst Dabco RP205

Product Description: High efficient amine catalyst for low density (below 10kg\\\m³) sponges, with good operating tolerance and foam stabilization effect, it can replace the similar product SMP, which plays the role of amine catalyst. Has the ability to increase hardness. Used in the manufacture of low density flexible slabstock foam, it can provide wide process latitude.

Profile:

RP-205 is an amine catalyst developed for “dichloromethane formulations” (content >20), which is suitable for the production of low density (less than 10 kg/m3) slabstock foams.

RP-205 has a high catalytic capacity and high catalytic activity.

Compared to conventional amine catalysts, catalyst RP-205 provides good operating latitude and foam stabilization during the foaming process.

Compared with the same type of amine catalyst in the market, Catalyst RP-205 can increase the sponge hardness.

It is easy to use and can be directly replaced by customers using the same type of amine catalyst (within 10% difference in dosage).

Points for use: When using RP-205, it is recommended to pay attention to the following points:

RP-205 is recommended to be used as a separate amine catalyst.

2. It is recommended that the original amount of amine catalyst used be replaced by 1:1, and then fine-tuned according to actual needs. (It is recommended that the fine-tuning range is within 10% of the amine dosage.)

3、Catalyst RP-205 can be used directly for dosing or pre-mixed with polyether, the mixing ratio can be 1:5 to 1:12 or lower.

4、When catalyst RP-205 is mixed with polyether polyol, the storage period of the mixture should not exceed 12 hours. (Use up on the same day)

5、Because of the low vapor pressure of RP-205, the package should be sealed immediately after use to avoid volatilization and failure.

Shelf life.

Keep unopened for two years

Storage:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Overview:

Product Name: Dabco MP602

Alias: Dabco MP602, Delayed Amine Catalyst, Non-Emitting Amine Catalyst, Non-Emitting Delayed Amine Catalyst, Dabco Amine Catalyst, Non-Emitting Gel Catalyst, Non-Emitting Amine Catalyst

Product Description: Dabco MP602 Non-Emitting Delayed Gel Catalyst

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):80

Density (25℃,g/cm3): 0.96

Water solubility: soluble in water

Flash point (PMCC,℃): 103

Hydroxyl value (mgKOH/g): 310

Brief introduction.

Dabco MP602 Delayed Catalyst is a delayed-containment, non-emissive tertiary amine that primarily promotes urethane (polyol-isocyanate) reactions.Dabco MP602 Delayed Catalyst was developed for use in polyurethane cold curing foam molding systems.Dabco MP602 Delayed Catalyst reacts via chemical bonding into the polyurethane foam substrate while maintaining or improving foam properties in the molded foam system.Dabco MP602 Delayed Catalyst has been developed for use in polyurethane cold curing foaming systems. Foam Performance in Molded Foam Systems.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 0.96

Viscosity @ 25°C mPa.s 80

Water solubility @25℃ completely soluble

Flash point, ℃ 103

Characteristics

Non-emitting polyurethane catalyst

Provides good surface cure for faster mold release and increased productivity

Suggestions for Use: Dabco MP602 Delayed Catalyst

Dabco MP602 Delayed Catalyst is used as a co-catalyst in polyurethane foam molding applications in conjunction with regular polyurethane catalysts or other non-emissive catalysts to facilitate mold release or improve skin appearance.

In polyurethane foam systems for cold curing high resilience sponges, Dabco MP602 Delayed Catalyst is recommended at a usage level of 0.10-0.40 pphp. For performance, Dabco MP602 Delayed Catalyst should be used in combination with Dabco MP601 Delayed Catalyst. If required to meet OEM emissions testing, we recommend the use of Dabco NE1070, Dabco NE300 and Dabco MP602 Delay Catalyst.

Product Usage:

Dabco MP602 is a non-emitting, delayed reaction amine catalyst primarily used to promote urethane (polyol-isocyanate) reactions; Dabco MP602 chemically binds to the polyurethane foam matrix while still maintaining or even improving foam properties in molded foam systems;

Dabco MP602 provides good skin curing and rapid mold release for improved productivity;

Dabco MP602 can be used in both cold and heat cured flexible molded polyurethane foam systems;

The recommended dosage of Dabco MP602 is 0.1-0.4 PPHP (per 100 parts of polyol), and Dabco MP602 can be used in conjunction with Dabco MP601 for better product performance.

Shelf life.

Keep unopened for two years

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Overview:

Product Name: Dabco NE210

Alias: Dabco NE210, Amine Equilibrium Catalyst NE210, Equilibrium Catalyst NE210, Dabco Amine Catalyst, Non-Emitting Amine Catalyst, Amine Catalyst, Amine Equilibrium Catalyst

Product Description: Dabco NE210 is a solution of 30% ZF-10 and 70% NE1070.

Product Physical Properties:

Appearance: light yellow liquid

Viscosity (25℃,mPa.s): 320

Density (25℃,g/cm3): 1.03

Water solubility: soluble in water

Flash point (PMCC,℃): 134

Hydroxyl value (mgKOH/g): 620

Typical Physical Properties Table.

Appearance Colorless transparent liquid

Specific gravity 1.03

Viscosity@25℃ mPa.s 320

Water solubility @25°C Completely soluble

Flash point, ℃ 134

Product Usage:

Dabco NE210 is a non-emitting amine equilibrium catalyst that reacts into the polyurethane matrix and therefore produces no emissions;

Dabco NE210 is suitable for all molded foam and high density foam applications to meet OEM emission regulations such as VDA278;

Advantages of Dabco NE210 include: no amine catalyst emissions, no VOC emissions, no vinyl staining, no windshield fogging, and stable masterbatch;

Dabco NE210 can be used in any water-blown TDI or TDI/MDI high resilient foam (HR) as well as TDI/MDI or MDI-type cold cure molded polyurethane foam;

Dabco NE210 is recommended at a dosage of 0.50 to 1 PPHP (per hundred parts of polyol) in MDI systems and 0.40 to 0.70 PPHP in TDI systems.

DABCO NE210 polyurethane foaming catalyst is a new, second generation, non-emission (NE) foaming catalyst that chemically binds to the polyurethane foam matrix and maintains the foam properties of diphenylmethylene diisocyanate (MDI) or toluene diisocyanate (TDI) systems.

DABCO NE210 eliminates windshield fogging and polyethylene plastic contamination caused by odor and volatile emissions when used in automotive manufacturing. This catalyst can be used in combination with other non-volatile catalysts such as Dabco NE1070 or alone with conventional co-catalysts to reduce volatiles and odor emissions. The Dabco NE210 catalyst was shown to be free of volatile emissions by dynamic above surface gas analysis using standard automotive OEM VDA278 methodology. These results confirm that the catalyst is fully bonded to the foam matrix. Vapor pressure measurements show that the volatility of the catalyst is well below current industry standards, which means that catalyst processing in foam production lines is much less volatile.

Advantages of DABCO NE210:

1. No amine catalyst volatilization

2、No volatile organic compounds emission

3, no polyethylene plastic contamination

4, no windshield fog and water droplets

5, Batch-to-batch stability is guaranteed

Shelf life.

Keep unopened, two years

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Overview:

Product Name: Dabco NE210

Alias: Dabco NE210, Amine Equilibrium Catalyst NE210, Equilibrium Catalyst NE210, Dabco Amine Catalyst, Non-Emitting Amine Catalyst, Amine Catalyst, Amine Equilibrium Catalyst

Product Description: Dabco NE210 is a solution of 30% ZF-10 and 70% NE1070.

Product Physical Properties:

Appearance: light yellow liquid

Viscosity (25℃,mPa.s): 320

Density (25℃,g/cm3): 1.03

Water solubility: soluble in water

Flash point (PMCC,℃): 134

Hydroxyl value (mgKOH/g): 620

Typical Physical Properties Table.

Appearance Colorless transparent liquid

Specific gravity 1.03

Viscosity@25℃ mPa.s 320

Water solubility @25°C Completely soluble

Flash point, ℃ 134

Product Usage:

Dabco NE210 is a non-emitting amine equilibrium catalyst that reacts into the polyurethane matrix and therefore produces no emissions;

Dabco NE210 is suitable for all molded foam and high density foam applications to meet OEM emission regulations such as VDA278;

Advantages of Dabco NE210 include: no amine catalyst emissions, no VOC emissions, no vinyl staining, no windshield fogging, and stable masterbatch;

Dabco NE210 can be used in any water-blown TDI or TDI/MDI high resilient foam (HR) as well as TDI/MDI or MDI-type cold cure molded polyurethane foam;

Dabco NE210 is recommended at a dosage of 0.50 to 1 PPHP (per hundred parts of polyol) in MDI systems and 0.40 to 0.70 PPHP in TDI systems.

DABCO NE210 polyurethane foaming catalyst is a new, second generation, non-emission (NE) foaming catalyst that chemically binds to the polyurethane foam matrix and maintains the foam properties of diphenylmethylene diisocyanate (MDI) or toluene diisocyanate (TDI) systems.

DABCO NE210 eliminates windshield fogging and polyethylene plastic contamination caused by odor and volatile emissions when used in automotive manufacturing. This catalyst can be used in combination with other non-volatile catalysts such as Dabco NE1070 or alone with conventional co-catalysts to reduce volatiles and odor emissions. The Dabco NE210 catalyst was shown to be free of volatile emissions by dynamic above surface gas analysis using standard automotive OEM VDA278 methodology. These results confirm that the catalyst is fully bonded to the foam matrix. Vapor pressure measurements show that the volatility of the catalyst is well below current industry standards, which means that catalyst processing in foam production lines is much less volatile.

Advantages of DABCO NE210:

1. No amine catalyst volatilization

2、No volatile organic compounds emission

3, no polyethylene plastic contamination

4, no windshield fog and water droplets

5, Batch-to-batch stability is guaranteed

Shelf life.

Keep unopened, two years

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.