Dabco T-12 Tin Catalyst

Alias: Dabco T-12 Tin Catalyst, Dabco T-12, Catalyst T-12

Product Physical Properties

Relative density: 1.02(25℃)

Viscosity: 120mPa.s(25℃)

Flash point (TCC): 121°C

Boiling point: 185°C

Product use

NT CAT T-120 is a strong gel catalyst for polyurethane.

NT CAT T-120 is a strong gelling catalyst that catalyzes the reaction of -OH with -NCO in the polyurethane industry;

NT CAT T-120 has higher catalytic activity compared to T-12, and also has better hydrolysis resistance and storage stability, and is mainly used in polyurethane glues, microcellular elastomers and hard foams.

Tin Catalyst Dabco T-12

Products

Dabco T-12 (dibutyltin dilaurate) is an organotin compound with a high boiling point. It is used as a highly efficient catalyst in the manufacture of polyurethane foams, coatings, adhesives and sealants. Although pure dibutyltin dilaurate is solid at room temperature, our Dabco T-12 has been specially treated to be liquid above 18℃. Due to climate change, the physical properties of T-12 may change. If there is any change, customers should warm T-12 up to 65℃.

Applications

Dabco T-12 catalyst is useful in the manufacture of rigid polyurethanes. In applications where the use of an amino catalyst alone presents a catalytic deficit, an organometallic such as Dabco T-12 catalyst creates a synergistic effect of increased activity with the Dabco amino catalyst, making it suitable for use in the manufacture of rigid foams where high rates of catalytic activity are required. High density structural foams, spray wall insulation and rigid panels are all manufactured in high speed lines.

Dabco T-12 can be used in one-component moisture-curing polyurethane coatings, two-component coatings, adhesives and sealants.

Physical Properties

Appearance Oil Liquid

Total Tin Content 18

Acid value 176

Freezing point 18°C

Specific gravity (25℃) 1.05

Storage and transportation:

Should be sealed and stored in dry, cool and ventilated warehouse

Packing:

180KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product.

Overview:

Chinese name: polyurethane catalyst T-12, organotin-T12

Alias: Dibutyltin dilaurate, polyurethane catalyst T-12, organotin catalyst T12, organotin-T12, catalyst T-12, Dabco T-12, Niax D-22, Kosmos 19, PC CAT T-12, Addocat 201, organotin T-12, dibutyltin dilaurate, organotin stabilizer

Foreign name: T-12

T-12 is a chemical substance with the molecular formula C32H64O4Sn.

Component: Dibutyltin dilaurate

Molecular formula: C32H64O4Sn

Abbreviation: DBTDL,DBTL

Relative molecular mass: 631.56

CAS No.: 77-58-7

Brand: NT CAT 12

Active substance content: 18%

Product specification 200KG/drum

Product name: Dabco T-12

Main application: polyurethane catalyst

Molecular formula: C32H64O4Sn

Abbreviation: DBTDL,DBTL

Relative molecular mass: 631.56

CAS No.: 77-58-7

Physical indicators:

Light yellow transparent oily liquid, soluble in general plasticizers and solvents, insoluble in water. Appearance: light-colored transparent liquid;

Color (GARDNER): ≤ 7

Viscosity: ≤ 380mPas (25℃)

Refractive index: 1.468-1.475 (20℃)

Density: 1.04-1.06g/cc (20℃)

Tin content: ≥ 18.5-19.0wt%

Moisture: ≤ 0.3%

Uses:

NT CAT 12 is a new type of organotin catalyst with high catalytic activity and does not contain dibutyltin, dioctyltin and other toxic organotin compounds restricted by the European Union in 8, which meets the European Union pollution test standards;

NT CAT 12 can be used to replace traditional catalysts such as dibutyltin dilaurate and stannous octanoate for polyurethane foams, coatings, adhesives and elastomers, etc. The range of applications is quite wide.

Polyurethane Catalyst T-12 Organotin T12 Organotin Catalyst T12 Organotin T-12 Dabco T-12 Niax D-22 Kosmos 19 PC CAT T-12 Addocat 201 Organotin T-12 Dibutyltin Dilaurate Organotin Stabilizer

Storage and transportation:

Should be sealed and stored in dry, cool and ventilated warehouse

Packing:

180KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.