Overview:
Chinese name: dimethylaminoethoxyethanol, N,N-dimethyl ethylaminoethylene glycol
Alias: Dimethylaminoethoxyethanol, 1704-62-7, N-dimethylethylaminoethylene glycol, low odor foaming catalyst DMAEE, low foaming catalyst DMAEE, low odor catalyst DMAEE, DMAEE, Dabco DMAEE, Toyocat RX3, Jeffcat ZR-70, Lupragen N107, PC CAT NP70, Foaming Catalyst DMAEE, Polyurethane Foaming Catalyst DMAEE, Odorless Catalyst, Odorless Amine Catalyst, Specialty Catalysts
English name: dimethyaminoethoxyethanol, dimethyl2-(2-aminoethoxy)ethanol, 2-(2-dimethylaminoethoxy)-ethynol
Molecular Formula: C6H15NO2
Relative molecular weight: 133.2
CAS No.: 1704-62-7
English Name 2-[2-(Dimethylamino)ethoxy]ethanol
Product name 2-[2-(Dimethylamino)ethoxy]ethanol; N,N-Dimethylaminoethyl ethylene glycol
Molecular structure See figure
Molecular formula C6H15NO2
Molecular weight 133.19

CAS 1704-62-7
EINECS 216-940-1
Density 0.954
Boiling point 95 ºC (15 mmHg)
Refractive index 1.442
Flash Point 93 ºC

Physical and Chemical Properties:
Dimethylaminoethoxyethanol is colorless or light yellow liquid at room temperature, soluble in water;
Viscosity(25℃,mPa.s):4
Density (25℃,g/cm3): 0.84
Water solubility: soluble in water
Flash point (PMCC,℃): 88
Hydroxyl value (mgKOH/g): 298

Dimethylaminoethoxyethanol Dimethylaminoethoxyethanol CAS 1704-62-7 N,N-Dimethylethylaminoethylene glycol Low odor foaming catalyst DMAEE Low foaming catalyst DMAEE Low odor catalyst DMAEE DMAEE Dabco DMAEE Toyocat RX3 Jeffcat ZR-70 Lupragen N107 PC CAT NP70 Foaming Catalyst Polyurethane Foaming Catalysts

Physical and Chemical Properties:
Colorless or light yellow liquid, relative density (20℃) 0.96, viscosity 5mPa.s, flash point 86℃(PMCC), 93℃(PTT), vapor pressure (21℃) <6.7Pa, boiling point 201~205℃, freezing point <-40℃, soluble in water, pH about 11.0.

Characteristics and Uses:
Low-odor reactive catalyst for rigid foam, also used in molded soft foam and polyether polyurethane soft block foam.

Applications:
Dimethylaminoethoxyethanol is a non-emitting amine catalyst primarily used in low density, water-blown, open-cell spray polyurethane foams (SPF); Dimethylaminoethoxyethanol can be used alone as a primary catalyst, or as a co-catalyst to reduce the use of a class of BDMAEE-based foaming catalysts.

Storage and Transportation:
Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:
200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. Shower and change clothes after work. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

DMAEE CAS:1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol

Overview:

Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol

Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70

MF： C6H15NO2

MW：133.19

CAS： 1704-62-7

Physical and chemical properties:

Features and uses:

PC-37 is colorless or light yellow liquid at room temperature, soluble in water;

PC-37 is a low odor reactive catalyst for rigid packaging foam. Its structure contains active hydrogen, which can react with -NCO and combine into the system, so the smell of finished products is greatly reduced. NT CAT PC-37 can also be used for molding soft foam and polyether polyurethane soft block foam.

Storage Information:

Store in a cool and ventilated warehouse. Keep away from fire and heat. Protect from direct sunlight. Keep container sealed. It should be stored separately from oxidant and edible chemicals, and mixed storage is forbidden. Firefighting equipment of corresponding variety and quantity shall be provided.   

Package:

190KG/Steel Drum

(PC37, PC-37, POLYCAT 37/Jeffcat ZR-70/DABCO DMAEE/Lupragen N107/ Toyocat RX3/equal)

Physical and chemical properties

Dimethylaminoethoxyethanol is a colorless or pale yellow liquid at room temperature and is soluble in water;
Viscosity (25 ° C, mPa.s): 4
Density (25 ° C, g / cm3): 0.84
Water soluble: soluble in water
Flash point (PMCC, °C): 88
Hydroxyl value (mgKOH/g): 298 application Dimethylaminoethoxyethanol is a non-spray amine catalyst, mainly used in low density, water-foamed open-cell spray polyurethane foam (SPF); Oxyethanol can be used as a main catalyst alone or as a cocatalyst to reduce the amount of BDMAEE-based foaming catalyst used.

DMAEE CAS:1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol

Overview:

Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol

Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70

MF： C6H15NO2

MW：133.19

CAS： 1704-62-7

Physical and chemical properties:

Features and uses:

PC-37 is colorless or light yellow liquid at room temperature, soluble in water;

PC-37 is a low odor reactive catalyst for rigid packaging foam. Its structure contains active hydrogen, which can react with -NCO and combine into the system, so the smell of finished products is greatly reduced. NT CAT PC-37 can also be used for molding soft foam and polyether polyurethane soft block foam.

Storage Information:

Store in a cool and ventilated warehouse. Keep away from fire and heat. Protect from direct sunlight. Keep container sealed. It should be stored separately from oxidant and edible chemicals, and mixed storage is forbidden. Firefighting equipment of corresponding variety and quantity shall be provided.   

Package:

190KG/Steel Drum

(PC37, PC-37, POLYCAT 37/Jeffcat ZR-70/DABCO DMAEE/Lupragen N107/ Toyocat RX3/equal)

Physical and chemical properties

Dimethylaminoethoxyethanol is a colorless or pale yellow liquid at room temperature and is soluble in water;
Viscosity (25 ° C, mPa.s): 4
Density (25 ° C, g / cm3): 0.84
Water soluble: soluble in water
Flash point (PMCC, °C): 88
Hydroxyl value (mgKOH/g): 298 application Dimethylaminoethoxyethanol is a non-spray amine catalyst, mainly used in low density, water-foamed open-cell spray polyurethane foam (SPF); Oxyethanol can be used as a main catalyst alone or as a cocatalyst to reduce the amount of BDMAEE-based foaming catalyst used.

DMAEE CAS:1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol

Overview:

Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol

Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70

MF： C6H15NO2

MW：133.19

CAS： 1704-62-7

Physical and chemical properties:

Features and uses:

PC-37 is colorless or light yellow liquid at room temperature, soluble in water;

PC-37 is a low odor reactive catalyst for rigid packaging foam. Its structure contains active hydrogen, which can react with -NCO and combine into the system, so the smell of finished products is greatly reduced. NT CAT PC-37 can also be used for molding soft foam and polyether polyurethane soft block foam.

Storage Information:

Store in a cool and ventilated warehouse. Keep away from fire and heat. Protect from direct sunlight. Keep container sealed. It should be stored separately from oxidant and edible chemicals, and mixed storage is forbidden. Firefighting equipment of corresponding variety and quantity shall be provided.   

Package:

190KG/Steel Drum

(PC37, PC-37, POLYCAT 37/Jeffcat ZR-70/DABCO DMAEE/Lupragen N107/ Toyocat RX3/equal)